0

Your Cart is Empty

Quick Guide to Help You Install Your New HPS Performance Drop-In Air Filter

April 12, 2022 2 min read

Our HPS Performance Drop-In Air Filter is an upgrade that offers many benefits such as improved filtration, greater air flow, and continued reusability. This quick and easy 5 minute install is a direct replacement upgrade that requires no modifications and little to no mechanical knowledge. Just swap out your old filter and you’re ready to go.

Many manufacturers use a high pressure injection process to mold their frames which can result in noticeable black outlines along the edge of the filter. This leakage can lead to unwanted air restriction and reduced overall performance. Made in the USA using a proprietary 4-step low pressure injection molding process, our filters never have any issues with seepage onto the filtering media which maximizes the filtering surface.

Rubber overflow from base onto the filtering media as a result of high pressure injection molding

Our product features a deep pleated double-layered woven cotton filtration surface that allows for up to 25% more air to move through while trapping particulate matter as small as 5 microns. The stainless steel mesh that encases the cotton provides a strong protective barrier to withstand even the toughest conditions.

HPS Performance Drop-In Air Filter vs. OEM Toyota Tacoma air filter

 

How to Install Your HPS Performance Drop-In Panel Filter

Unbuckle the clips from the airbox and lift up the lid. Some airboxes are secured using bolts so you may need a wrench or screwdriver to remove the cover.

Remove the stock air filter from the airbox.

Insert the HPS filter into the in the same orientation as the stock filter (lip of the base should be on top).

Replace the airbox lid.

Rebuckle the clips (reinstall the bolts) on the airbox.

 

Video Instructions:

 

 

Fits the Following Vehicles:

2014-2022 Toyota Sequoia 5.7L V8
 2016-2022  Toyota Tacoma 3.5L V6
2014-2019  Toyota  Tundra  4.6L V8
2014-2021 Toyota Tundra 5.7L V8

 

Featured filter part number: HPS-457290

 

To purchase an HPS Performance Drop-In Panel Filter for your vehicle, click here.

 

 

Related Products:

HPS Performance Air Filter Cleaning and Synthetic Oil Recharge Kit


Also in How To / DIY

HPS Performance Drop-In Air Filters - How to Maintain Your Filter for the Long Haul
HPS Performance Drop-In Air Filters - How to Maintain Your Filter for the Long Haul

April 12, 2022 2 min read

Give your vehicle a breath of fresh air with our washable and reusable drop-in filters. Made to allow up to 25% more air flow than the leading manufacturer, these high-quality filters can also block particles as small as 5 microns from entering the engine. Take advantage of our specially formulated HPS Performance Air Filter Cleaning and Synthetic Oil Recharge Kit when revamping your filter to keep it in top notch condition for years to come.
Read More
Tech Tip: How to measure oval tubing

February 10, 2022 1 min read

Read More
Tech Tip: How To Measure A Hose Clamp

February 10, 2022 2 min read

Read More