HPS 6061 T6 Aluminum Slip Fit Transition Reducer is commonly used in industrial, automotive, marine and aerospace industry; Great for custom fabrication project such as DIY welding, high performance air intake kit, cooling radiator and heater systems, turbo intercooler piping and charge pipe setup. 6061 aluminum is the most popular and versatile alloy, and is the least expensive of the heat treatable aluminum alloys. HPS aluminum round tubing Slip Fit transition Reducer is sold in the T6 condition, ideal for sawing, machining, sanding, and polishing. The aluminum Slip Fit transition Reducer tube can be polished, but due to the softness of the aluminum, care must be taken not to remove too much material, especially in the area near any welds.
Product Specification
- Product Type: Aluminum Slip Fit Transition Reducer
- Material: 16 Gauge 6061-T6 Aluminum.
Remark: HPS does NOT recommend 6061 Aluminum to be used for exhaust systems.
Size Chart
OD = Outside Diameter, ID = Inside Diameter| Size | Length | Wall Thickness | Part Number |
|---|---|---|---|
| 1-1/2" OD to 1-1/2" ID | 4" | 0.065" (1.65mm) | SLIP-AT150 |
| 1-3/4" OD to 1-3/4" ID | 4" | 0.065" (1.65mm) | SLIP-AT175 |
| 2" OD to 2" ID | 4" | 0.065" (1.65mm) | SLIP-AT200 |
| 2-1/2" OD to 2-1/2" ID | 4" | 0.065" (1.65mm) | SLIP-AT250 |
| 3" OD to 3" ID | 4" | 0.065" (1.65mm) | SLIP-AT300 |
| 3-1/2" OD to 3-1/2" ID | 4" | 2mm | SLIP-AT350 |
| 4" OD to 4" ID | 7" | 2mm | SLIP-AT400 |
| 4-1/2" OD to 4" ID | 7" | 2mm | SLIP-AT450 |
You may also like
